Maker Pro
Maker Pro

Woo-Woo The Don Smith Generator

Status
Not open for further replies.

pidja105

Oct 16, 2015
106
Joined
Oct 16, 2015
Messages
106
People,
I have small trouble with conversion from 8kV to 220v ~ 50Hz AC:
- In official guide i was read this:"The circuity for producing a 220 volt 50 Hz AC output or a 110 volt 60 Hz AC output from the storage capacitors is just standard electronic.
I don't know what that means,if someone has answer is this true and how to do this in other devices and which of these components are used to step down voltage,please answer here.
This is link to picture:
http://postimg.org/image/szcspnxit/
 

BobK

Jan 5, 2010
7,682
Joined
Jan 5, 2010
Messages
7,682
All over-unity devices are a scam. They cannot and do not work.

Edited to add: The only people who get anything out of free-energy devices are those who sell plans for them.


Bob
 
Last edited:

pidja105

Oct 16, 2015
106
Joined
Oct 16, 2015
Messages
106
I know that is fake,my question is which of these components are used to step down 8kV to 220V for other devices,that is may possible.That for plans is true.I watched Smith Generator presentation on youtube and Hendershot generator,people that was "build" them are writing same message to the creator,watch,they blocked comments to make smart people can't make warning :This video is scam.
 
Last edited:

BobK

Jan 5, 2010
7,682
Joined
Jan 5, 2010
Messages
7,682
Eliminate the rectifiers and capacitors, and place a transformer on the output.

In fact, you might as well eliminate the second transformer, then the neon light transformer, then the variac, and you will have 110VAC power.

Bob
 
Last edited:

Martaine2005

May 12, 2015
4,932
Joined
May 12, 2015
Messages
4,932
my question is which of these components are used to step down 8kV to 220V
None of them. It's step-up.
The only useful thing about that diagram is the variac...Only because I don't have one..

Martin
 

pidja105

Oct 16, 2015
106
Joined
Oct 16, 2015
Messages
106
Can voltage be step-down with two resistors like on picture i've uploaded?
If can can you tell me r1 and r2 value in ohm-s or kohm?
 

Attachments

  • DonSmithPaperphotos8.jpg
    DonSmithPaperphotos8.jpg
    40.5 KB · Views: 277

(*steve*)

¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd
Moderator
Jan 21, 2010
25,510
Joined
Jan 21, 2010
Messages
25,510
Yes, resistors can be used to reduce voltage in a highly inefficient manner.

However the circuit you show will not produce AC at any frequency.
 
Status
Not open for further replies.
Top