Hi,
I wanted to ask if I have a thick film resistor with the following specifications:
Case size 0603
Tolerance +/-1%
Voltage 50V
Value 10K
Temp coefficient 100PPM/C
Application is for ultrasonic level measurement
Can I replace this with a thin film resistor with a like to like spec? Or are there other parameters to consider.
Best regards,
Raj
I wanted to ask if I have a thick film resistor with the following specifications:
Case size 0603
Tolerance +/-1%
Voltage 50V
Value 10K
Temp coefficient 100PPM/C
Application is for ultrasonic level measurement
Can I replace this with a thin film resistor with a like to like spec? Or are there other parameters to consider.
Best regards,
Raj