Maker Pro
Maker Pro

Wanted: Thin OLED Panel(s)

Status
Not open for further replies.

Gryd3

Jun 25, 2014
4,098
Joined
Jun 25, 2014
Messages
4,098
Looking for a thin OLED panel that I can cut... something like:

It does not have to be white... I'm having a hard time finding a source for these things... I do want it to be very thin.
2-3mm is a little on the thick side, but may be acceptable. Any ideas are very welcome. If I cannot find OLED, I will need to use EL Panel... Here's hoping.

(Hopefully this is acceptable for a Sale/Wanted post.)
 
Status
Not open for further replies.
Top