Maker Pro
Maker Pro

Thin Push Pull Motor

NinjaLikeDat

Nov 21, 2015
2
Joined
Nov 21, 2015
Messages
2
Hello, I'm making a project and need a push pull motor that is very thin (8mm max) and has a good stroke (around 10mm). Could somebody please direct me to the right one.
 

Alec_t

Jul 7, 2015
3,587
Joined
Jul 7, 2015
Messages
3,587
10mm stroke is asking a lot for a very small solenoid. What force do you need? Couldn't you use a small geared motor operating a crank/linkage?
 
Top