Basically I have four GR02 Planetary gear motors (http://www.gimsonrobotics.com/GR02-12V_18V_planetary_electric_gearmotor.html) which I am hoping to power with two Turnigy LiPo batteries. (http://www.hobbyking.com/hobbyking/store/__9183__Turnigy_5000mAh_3S_25C_Lipo_Pack.html)
I am connecting the batteries and motors to two Adafruit motor shields (https://learn.adafruit.com/adafruit-motor-shield-v2-for-arduino/overview) to hopefully work in conjunction with an Arduino Uno. I am, however, just noticing on the specs of motors and motor shields that the current values do not match well. Will it be possible for me to run these motors off this shield or will I need a higher current motor shield?
I am connecting the batteries and motors to two Adafruit motor shields (https://learn.adafruit.com/adafruit-motor-shield-v2-for-arduino/overview) to hopefully work in conjunction with an Arduino Uno. I am, however, just noticing on the specs of motors and motor shields that the current values do not match well. Will it be possible for me to run these motors off this shield or will I need a higher current motor shield?