Maker Pro
Maker Pro

Treadmill board controller issue Urgent!!

KamelKDR

Feb 11, 2021
3
Joined
Feb 11, 2021
Messages
3
Hello, Every one everybody,
I have a Tai-Zhi controller treadmill board (Tz-7009) that is facing error E1. The motor turns for one second only (5 degrees ) and then stops and e1 will be shown within 10 seconds, the Mosfet are good also the motor, speed sensor is ok.
I am wondering if someone has already encountered this problem before and get the solution, Please provide with.

Thanks in advance
 
Top