Maker Pro
Maker Pro

Triax TV masthead amplifier

G

Graeme

Jan 1, 1970
0
I know this is a bit of a long shot but...
Does anybody know of a modification that will allow this unit (TMA28WU) to
run from straight 12V dc and not through a separate power supply via the
output connector?
TIA.
 
F

Franc Zabkar

Jan 1, 1970
0
I know this is a bit of a long shot but...
Does anybody know of a modification that will allow this unit (TMA28WU) to
run from straight 12V dc and not through a separate power supply via the
output connector?
TIA.

I believe you will need to connect an appropriately valued inductor in
series with the supply. This inductance will be a S/C at DC, but O/C
at UHF/VHF frequencies.


- Franc Zabkar
 
G

Graeme

Jan 1, 1970
0
Franc Zabkar said:
I believe you will need to connect an appropriately valued inductor in
series with the supply. This inductance will be a S/C at DC, but O/C
at UHF/VHF frequencies.

Thanks.
I got another reply (different group) which said that you can make this
inductor using 10 turns of 24SWG wire on a 3mm diameter former. I don't know
if this works because the manufacturers also sent me details on a simple
modification to the circuit board which I have performed.
 
Top