Maker Pro
Maker Pro

Trying to figure out what this is..

Sandman1

Mar 25, 2015
3
Joined
Mar 25, 2015
Messages
3
Looks To me like some sort of PWM generator, Does it look famillar to any of you guys out there
?? 20150324_161748 (1).jpg
 

Attachments

  • 20150324_161748.jpg
    20150324_161748.jpg
    22.8 KB · Views: 113
  • 20150324_181456.jpg
    20150324_181456.jpg
    19.8 KB · Views: 120

davenn

Moderator
Sep 5, 2009
14,254
Joined
Sep 5, 2009
Messages
14,254
Hi there
welcome to EP

from those pics, cannot tell, none of the components are identifiable
what did it come from ?
 

davenn

Moderator
Sep 5, 2009
14,254
Joined
Sep 5, 2009
Messages
14,254
still no idea

again ... what did it come from ?
 

Sandman1

Mar 25, 2015
3
Joined
Mar 25, 2015
Messages
3
Came from a controller of sorts its suppost to simulate vehicle speed to fool a ECM for a car, Just wondering if its some sort of generic DIY kit, or made or somthing else and is being repurposed..
 

Tha fios agaibh

Aug 11, 2014
2,252
Joined
Aug 11, 2014
Messages
2,252
I don't think your going to get much help here without being more specific.

You could try making a schematic and listing the markings on the components.
Then it may be more apparent what we are dealing with.
 

kpatz

Feb 24, 2014
334
Joined
Feb 24, 2014
Messages
334
X3.. we need component markings or a schematic.

The little black things look like transistors, but what kind? PNP, NPN, N-channel or P-channel FETs, etc. No way to know without markings. There's also an 8-pin IC (get the number off that if you can) and a diode.

Some better quality pictures would be helpful too. Try a well lit area and no flash, and use a real camera instead of a phone if you have one available.
 

davenn

Moderator
Sep 5, 2009
14,254
Joined
Sep 5, 2009
Messages
14,254
and clean all the gunk off the board
 
Top