R
Reactor
- Jan 1, 1970
- 0
Hi,
A few weeks ago, I posted about my 12 year old RCA TV that started giving me
snowy pix. The consensus was that I am suffering from the common issue of
poor factor soldering on the CTC175 main board.
I have the TV gutted and need to get the tuner covers off. I am told the
top one just pops off, but I need to get the bottom one off. I can't tell
where I need to desolder to remove the bottom cover.
I know there are four points that need desoldering, and there are four
circular blobs of solder in the middle of the tuner cover.
Are these the areas that I need to desolder, or are the ones I need
somewhere around the perimeter of the cover, and do they attach the cover to
the PCB?
Thanks in advace!!
A few weeks ago, I posted about my 12 year old RCA TV that started giving me
snowy pix. The consensus was that I am suffering from the common issue of
poor factor soldering on the CTC175 main board.
I have the TV gutted and need to get the tuner covers off. I am told the
top one just pops off, but I need to get the bottom one off. I can't tell
where I need to desolder to remove the bottom cover.
I know there are four points that need desoldering, and there are four
circular blobs of solder in the middle of the tuner cover.
Are these the areas that I need to desolder, or are the ones I need
somewhere around the perimeter of the cover, and do they attach the cover to
the PCB?
Thanks in advace!!