M
mike
- Jan 1, 1970
- 0
I've got this Magnavox 15MF050V/17 LCD TV/VGA monitor.
Has two tuner modes AIR and CATV. Has one RF input.
In Air mode, the setup mode automatically scans
the channels. It properly recoginzes local VHF and UHF channels
EXCEPT channel 10. It sets up channel 11 with a blue
screen. If I manually force it to channel 10, I get
a black&white picture with a lot of noise in the sound. Can't
find any way to tweek the frequency.
In CATV mode, it properly scans and programs all the VHF channels
including channel 10. Channel 10 picture is great.
But it won't get any of the UHF channels.
The symptoms suggest to me that the tuner is ok?
But I have no idea what's going on or how to fix it.
Suggestions?
Thanks, mike
Has two tuner modes AIR and CATV. Has one RF input.
In Air mode, the setup mode automatically scans
the channels. It properly recoginzes local VHF and UHF channels
EXCEPT channel 10. It sets up channel 11 with a blue
screen. If I manually force it to channel 10, I get
a black&white picture with a lot of noise in the sound. Can't
find any way to tweek the frequency.
In CATV mode, it properly scans and programs all the VHF channels
including channel 10. Channel 10 picture is great.
But it won't get any of the UHF channels.
The symptoms suggest to me that the tuner is ok?
But I have no idea what's going on or how to fix it.
Suggestions?
Thanks, mike