Maker Pro
Maker Pro

Ultra compact AAA battery holders?

D

Doug Warner

Jan 1, 1970
0
I have a project that requires a 2X AAA battery holder that barely
takes up more room than the two batteries alone.
This common type:
http://rocky.digikey.com/WebLib/Memory Protection Devices/Web Data/BH2AAAW.pdf
is still too big, at 1/2" high, and 2" long.
The holder still needs to maintain a tight grip on the batteries, but
allow easy toolless changes.

Any ideas before I start building them from scratch?

To reply, please remove one letter from each side of "@"
Spammers are VERMIN. Please kill them all.
 
A

Anders F

Jan 1, 1970
0
I have a project that requires a 2X AAA battery holder that barely
takes up more room than the two batteries alone.
This common type:
http://rocky.digikey.com/WebLib/Memory Protection Devices/Web Data/BH2AAAW.pdf
is still too big, at 1/2" high, and 2" long.
The holder still needs to maintain a tight grip on the batteries, but
allow easy toolless changes.

Any ideas before I start building them from scratch?

--

Farnell have PCB mounted holders (actually its a single spring part - you
use one for each end). I've only bought 'em in AA, but I think they come in
AAA too....

/A
 
B

Boris Mohar

Jan 1, 1970
0
I have a project that requires a 2X AAA battery holder that barely
takes up more room than the two batteries alone.
This common type:
http://rocky.digikey.com/WebLib/Memory Protection Devices/Web Data/BH2AAAW.pdf
is still too big, at 1/2" high, and 2" long.
The holder still needs to maintain a tight grip on the batteries, but
allow easy toolless changes.

Any ideas before I start building them from scratch?
http://www.keyelco.com/



Regards,

Boris Mohar

Got Knock? - see:
Viatrack Printed Circuit Designs (among other things) http://www.viatrack.ca
 
Top