Maker Pro
Maker Pro

Unusual component identification

Status
Not open for further replies.

KE0KOY

Mar 7, 2017
6
Joined
Mar 7, 2017
Messages
6
I am trying to draw out the schematic for an old XR 5000 stun gun coil driver circuit and came across a strange looking part that i cannot identify. The part appears at first glance to be a diode but the white band is actually broken into arrows circling the part. The only other marking on the part is the number 45. What is this device? Due to the placement in the schematic, the only thing that makes sense is a diode but the diode test function on my multimeter does not register anything.
 

(*steve*)

¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd
Moderator
Jan 21, 2010
25,510
Joined
Jan 21, 2010
Messages
25,510
High voltage diodes (if that's what it is) can't be tested with just a multimeter.

But we're not going to help you with a weapon.
 
Status
Not open for further replies.
Top