Maker Pro
Maker Pro

USB to SATA bridge interface

M

Martin Riddle

Jan 1, 1970
0
Any recommendations for a USB to SATA bridge IC?
I am opting to go for a TI chip TUSB9261. I need to create a bridge
for a Slimline CD (slot), these are scarce to procure in an external
USB drive assy. But the drives are abundant.
if there is a pre made option that will work too. (board only).

Cheers
 
Any recommendations for a USB to SATA bridge IC?
I am opting to go for a TI chip TUSB9261.  I need to create a bridge
for a Slimline CD (slot), these are scarce to procure in an external
USB drive assy. But the drives are abundant.
if there is a pre made option that will work too. (board only).

Cheers

something like these?

http://www.reichelt.de/Gehaeuse-fue...8AAAIAAFzjIDc695dc3314d85be8abdb7c264112f1d55

http://www.reichelt.de/Dockingstati...8AAAIAAFzjIDc695dc3314d85be8abdb7c264112f1d55

-Lasse
 
M

Martin Riddle

Jan 1, 1970
0

Actually like this Startech thingy, but it is obsolete.
<http://www.startech.com/HDD/Adapter...ical-SATA-Adapter-with-SP4-Power~USB2SLSATINT>

I want to use it for this style drive.
<http://www.logicsupply.com/products/dv_w28ss_v>

Plus I need long term availbility. Rules out patching stuff together.

Cheers
 
M

miso

Jan 1, 1970
0
No need to design anything new. There are many USB to SATA adapters
for sale all over the web. I use them daily in my never ending quest
to keep junk computers alive.
<www.ebay.com/sch/i.html?_nkw=usb+sata+adapter>
There area also boxes for slimline CD/DVD drives with a built in USB
converter.
<www.ebay.com/sch/i.html?_nkw=cd+dvd+usb>

I use a Sabrent usb to SATA for cloning, It works fine on hard drives. I
have no first hand knowledge of how it works on a CD, though one of the
reviewers on newegg says it will work.

The last thing I'd do is roll my own interface.
 
Top