Maker Pro
Maker Pro

Using an old LCD (PW070XU3) from my MATSUI PL607 portable DVD player

cainy393

Jan 10, 2013
4
Joined
Jan 10, 2013
Messages
4
I've been tinkering a lot with my raspberry pi recently and I thought I maight be able to salvage the 7" LCD from my old dvd player to connect up to it. I hoped to find a simple connection that I could hook up to the composite video output on my pi but this was not the case.
The LCD takes a TFT Specific Analogue RGB signal according to this site that sells it: http://www.panelook.com/PW070XU3_E Ink_7.0_LCM_parameter_7010.html
Is there anyway I can hook this ting up to the composite, HDMI, or even the GPIO pins on my pi?
I've got some pictures below. I believe the white and pink wires are for back light control and the ribbon for the analogue video signal.
34sqjw0.jpg

zochti.jpg
 
Last edited:

(*steve*)

¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd
Moderator
Jan 21, 2010
25,505
Joined
Jan 21, 2010
Messages
25,505
There's no need to open multiple threads.
 
Top