Maker Pro
Maker Pro

Valve holders ...

A

Arfa Daily

Jan 1, 1970
0
Anyone know of a source of B9A skirted / shielded chassis mount valve
holders in the UK ? Need about 5 or so. Could get away with a couple at a
pinch.

Arfa
 
B

Baron

Jan 1, 1970
0
Arfa Daily inscribed thus:
Anyone know of a source of B9A skirted / shielded chassis mount
valve holders in the UK ? Need about 5 or so. Could get away with a
couple at a pinch.

Arfa

I might have some old kit that you can salvage !
 
A

Arfa Daily

Jan 1, 1970
0
Baron said:
Arfa Daily inscribed thus:


I might have some old kit that you can salvage !

Thanks for the offer Baron. I think that I have found a source of supply now
for new ones via Don Pearce who replied over on uk.rec.audio. He pointed me
to a place where you can put together pretty much whatever variety of base
you need, so I can get a tagged base and marry it up with a skirted mount,
and then add a screening can. Very reasonable prices too. Thanks again for
making the effort to reply. Appreciated.

Arfa
 
N

N Cook

Jan 1, 1970
0
Arfa Daily said:
Anyone know of a source of B9A skirted / shielded chassis mount valve
holders in the UK ? Need about 5 or so. Could get away with a couple at a
pinch.

Arfa

http://www.valves.uk.com/
on the IOW, used to have a range, don't know about now
 
N

N Cook

Jan 1, 1970
0
Arfa Daily said:
That was one of the places that I came across when Googling for this, but
they don't seem to have an on-line catalogue. Thanks anyway.

Arfa

a one man band

from his april 2006 paper cat
skirted B9A 1gbp each , 4gbp minimum postage
 
M

Meat Plow

Jan 1, 1970
0
That was one of the places that I came across when Googling for this, but
they don't seem to have an on-line catalogue. Thanks anyway.

Arfa

Seems to me I've purchased these from a Fender dealer along with some
replacement jaws for 6L6 tubes many moons ago.
 
Top