Maker Pro
Maker Pro

variable 1nput controller,,, I NEED HELP PLEASE

sweetguy4sure

Apr 25, 2011
1
Joined
Apr 25, 2011
Messages
1
Hi , i found your forum and i need some direction, im stuck on a project and have no idea how to solve the problem i have . First off im a mechanic and i have some electrical and mechanic backround. im also familiar with computers. im weak in electronic circuits. Im working on a project for cars that will help save alot of fuel. I net large gains of fuel savings now but i want to go to the next step in the project. here is what i need . i need a type of controller that is able to control up to a 30 amp 12-14vdc out on a variable 1-3 volt input. In other words i can tap off the throttle postion sensor in the car that is 1 volt at idle (throttle closed) and 3 volts (throttle wwide open). i need this to control a 30 amp unit. 30 amps being wide open and 5 amps being idle.i need the amperage to correspond to the 1-3 volts the throttle position sensor . any ideas? anyone? thank you for your time
 
Top