ZooKeepers
- Mar 26, 2020
- 1
- Joined
- Mar 26, 2020
- Messages
- 1
Hey everyone! I have a vcr that has an issue with the roller guides. The vcr takes in the tape fine, but would not display. Having it taken apart I see that the tape is guided back by both roller guides, but as it starts moving, the tape slips over the top of the right roller pin. It then continues spinning but only by the left roller guide. Any advice on adjusting this to prevent the issue. I have a video of this, but am unable to post. I can try to take some pictures if that helps. Thanks!
