Maker Pro
Maker Pro

very low voltage, very low power emf generator,

bigkim100

Apr 17, 2013
265
Joined
Apr 17, 2013
Messages
265
Is it possible to make a very low voltage, very low power emf generator, to test EMF Meters. It only needs a rage of a few inches.
Whatcha think? Thank you for any help, in advance
 

bigkim100

Apr 17, 2013
265
Joined
Apr 17, 2013
Messages
265
Microvolts, as low as possible, as this will be housed in a sealed container.
3v would be nice, but any voltage will be considered.
Radiated, if possible
frequency:50/60Hz frequency (but that can be quite sloppy, doesnt need to be on the nose
 

Harald Kapp

Moderator
Moderator
Nov 17, 2011
12,774
Joined
Nov 17, 2011
Messages
12,774
50 / 60 Hz radiated: You're going to need a biiiiig antenna!
 

bigkim100

Apr 17, 2013
265
Joined
Apr 17, 2013
Messages
265
I have a buck voltage board form Ebay that has a torroid on it...if I take an antenna off of one of its outputs, will the rf noise radiate?, Usually these guys generate a lot of Rf noise?
 
Top