Maker Pro
Maker Pro

Videonics MX-Pro MX-3000 power supply

Donny

Jun 17, 2017
3
Joined
Jun 17, 2017
Messages
3
I need help! I just bought a
Videonics MX-Pro MX-3000. It came without a power supply. Can anyone help me find one or build one. I have the schematic for the pins.
 

Donny

Jun 17, 2017
3
Joined
Jun 17, 2017
Messages
3
Yeah, been checking ebay, craigslist, etc.. for weeks. NO LUCK. Very difficult to find. I broke down all of the information I could find from many websites and pictures of my device opened up. There might be someone out there that knows how to build one?
 

Attachments

  • Videonics MX.pdf
    513.6 KB · Views: 245

Donny

Jun 17, 2017
3
Joined
Jun 17, 2017
Messages
3
Nope..link does not exist. Or it's sold or not available.
 

jiggler

Nov 22, 2018
1
Joined
Nov 22, 2018
Messages
1
Yeah, been checking ebay, craigslist, etc.. for weeks. NO LUCK. Very difficult to find. I broke down all of the information I could find from many websites and pictures of my device opened up. There might be someone out there that knows how to build one?

s-l1600.jpg
i have been searching too. very hard to find.
mine says

+5vdc @ 5.0a +7vdc @.6a -7vdc @.4a

on the bottom and not

+5vdc @ 5.0a +10vdc @.4a -10vdc @.4a

is there a difference between the mxpro model number mx3000 ntsc
and the dv version as far as power?

ive been looking through ebay pictures hoping to see the different stickers.
see different combinations of the above models and voltages.

did you ever get yours to turn on?
 
Top