Maker Pro
Maker Pro

Vout regulation with BCM PFC chip?

eem2am

Aug 3, 2009
429
Joined
Aug 3, 2009
Messages
429
Hello,
We have done a simulation of a 15W flyback PFC in BCM using LT3799. (vout = 40V)

The LT3799 is supposed to feature primary side regulation, however, we have added a secondary side error amplifier, and an opto in order that the secondary side voltage can be regulated to 40V. (as in the attached diagram)

Is this OK?
Can the LT3799 be operated like this?.....it does seem to work ok on the simulator (LTspice)

-by the way, also attached is the LTspice simulation file

LT3799 Datasheet:
http://cds.linear.com/docs/en/datasheet/3799fa.pdf
 

Attachments

  • pfc bcm _LT3799.pdf
    22.1 KB · Views: 122
  • pfc bcm _LT3799.txt
    11.7 KB · Views: 73
Last edited:
Top