Maker Pro
Maker Pro

Wallbox project charging electric car

tnnelectro

Apr 5, 2012
54
Joined
Apr 5, 2012
Messages
54
Hello everyone,

I wanted an opinion on an idea that came to me ...

I would like to design and build a Wallbox to charge Type1 and Type2 electric cars ... obviously for educational purposes only ...

Given that I am a programmer with experience in programming ATMEL microprocessors, sensors, displays etc ...

but I have no experience on power electronics and I don't know how to proceed ...

Someone kindly, can you give me links or suggestions of wiring diagrams to follow even basic ones,
which I would then enrich with micro processor display control etc

Thank you.
 

tnnelectro

Apr 5, 2012
54
Joined
Apr 5, 2012
Messages
54
Good morning and thank you !

but some link / advice / example useful for the realization of the wiring diagram for charging ....?
 

Bluejets

Oct 5, 2014
6,901
Joined
Oct 5, 2014
Messages
6,901
It would entail modifications to the main switchboard and /or sub circuits, which should only be done by those qualified.
 
Top