Maker Pro
Maker Pro

Want to have a connector box for various devices on motorcycle

juntjoo

Jun 8, 2015
82
Joined
Jun 8, 2015
Messages
82
Rather than having to splice and un-splice ever time I add something or remove something. Is the some kind of box I can install and at most have to crimp connector ends to bare wires to fit the box, I imagine it would be a lot easier and neater. I know little of electronics bare in mind. Any suggestions? Thanks
 

Bluejets

Oct 5, 2014
5,989
Joined
Oct 5, 2014
Messages
5,989
My guess would be it's already full with no room or capacity for additional equipment.
Additional unit shown would be fed directly from the battery ( via a wire fuse link as shown below)

https://www.ebay.com.au/itm/BWA-WIR...h=item489d8d852d:g:PL8AAOSww9xZJuAq:rk:1:pf:0

The main idea of a wire fusable link is there is NO unprotected wiring between the batery and the previously linked fuse box. No requirement to have 80Amp as shown, it's just an example. Depending on what you connect, size will be in proportion. Auto lecky or wrecking yard probably have something for much less cost.
 

Attachments

  • fusable_Link.jpg
    fusable_Link.jpg
    108.6 KB · Views: 0
Top