Maker Pro
Maker Pro

Wavetek/Fluke 302 Arbitrary Waveform Generator

Howdy,

I have just purchased this piece of test equipment however it came
without the required software to operate it. Unfortunately it is not
supported anymore and I am having trouble locating the software. The
software is called WaveWiz.... does anyone have a copy?

Thanks!!!
Mike
 
D

DaveM

Jan 1, 1970
0
goes.
Howdy,

I have just purchased this piece of test equipment however it came
without the required software to operate it. Unfortunately it is not
supported anymore and I am having trouble locating the software. The
software is called WaveWiz.... does anyone have a copy?

Thanks!!!
Mike

Go to http://us.fluke.com/usen/support/default.htm, click the Software Downloads
link. Don't know if they still have your software available, but it's worth a
try. You'll have to set up an account, but that doesn't cost anything.

While you're there, surf around the site.. never know, it might be hidden in
some dark corner that you'd never suspect.

--
Dave M
MasonDG44 at comcast dot net (Just substitute the appropriate characters in the
address)

Life is like a roll of toilet paper; the closer to the end, the faster it
 
G

GPG

Jan 1, 1970
0
Go tohttp://us.fluke.com/usen/support/default.htm, click the Software Downloads
link. Don't know if they still have your software available, but it's worth a
try. You'll have to set up an account, but that doesn't cost anything.

While you're there, surf around the site.. never know, it might be hidden in
some dark corner that you'd never suspect.

--
Dave M
MasonDG44 at comcast dot net (Just substitute the appropriate characters in the
address)

Life is like a roll of toilet paper; the closer to the end, the faster it

Any help here?
http://sine.ni.com/apps/utf8/niid_w...ge?p_id_guid=E3B19B3E9454659CE034080020E74861
 
Top