M
mike & jim
- Jan 1, 1970
- 0
I have used a "retired" Panasonic VHS camcorder for many years for our
web cam link. (see below) Unfortunately the cam was fried by lightning
a while back. After looking at several pawn shops I found a couple of
JVC brand cams to replace the broken Panasonic. However, I am unable to
figure out how to remove the sp, no tape, mag power, etc .... displays
that now appear in the pic. On the panasonic it was just a matter of
holding down the reverse & display buttons & the displays would go away.
Have tried various ways, but no results. Any suggestions out there ?
Thanks, Mike
Mike & Jim's RIVERCAM
http://jimandi.us/
web cam link. (see below) Unfortunately the cam was fried by lightning
a while back. After looking at several pawn shops I found a couple of
JVC brand cams to replace the broken Panasonic. However, I am unable to
figure out how to remove the sp, no tape, mag power, etc .... displays
that now appear in the pic. On the panasonic it was just a matter of
holding down the reverse & display buttons & the displays would go away.
Have tried various ways, but no results. Any suggestions out there ?
Thanks, Mike
Mike & Jim's RIVERCAM
http://jimandi.us/
