Maker Pro
Maker Pro

What are these buttons called on pir

Frankie Bateman

Jul 19, 2017
6
Joined
Jul 19, 2017
Messages
6
Hi people. Could anyone please advise me of what these buttons are called? I need the little plasric parts to go onto my pir module so it can be adjusted from the outside sketch-1500494141332.png
 

davenn

Moderator
Sep 5, 2009
14,077
Joined
Sep 5, 2009
Messages
14,077
ould anyone please advise me of what these buttons are called?

those little knobs are probably designed and built for that specific unit ....
you may find something remotely similar but not likely the same
 

Frankie Bateman

Jul 19, 2017
6
Joined
Jul 19, 2017
Messages
6
I've been searching for ages for them and can't find anything anywhere I know there's ones on specific models made for them but surely can buy them separately? Maybe
 

kellys_eye

Jun 25, 2010
5,105
Joined
Jun 25, 2010
Messages
5,105
Well your image looks just like the one I linked to....

...also, the knobs are the same. If the whole package doesn't 'fit' just buy one to use the knobs it comes with.
 

kellys_eye

Jun 25, 2010
5,105
Joined
Jun 25, 2010
Messages
5,105
.... which makes a total mockery of your original post and wasted a whole heap of peoples time :rolleyes:

Why did you take the time to publish the original picture AND edit the marking on it to illustrate the bits you (supposedly) want?

If they are the same as in that picture then, as per my last post, just buy the PIR and use the knobs off it. If it's something entirely different perhaps you'd like to enlighten us?
 

kellys_eye

Jun 25, 2010
5,105
Joined
Jun 25, 2010
Messages
5,105
If the OP wants 'remote' controls then rather than extend (or add) knobs then he should find the value of the adjustable controls (usually 10kΩ or 100kΩ) and purchase 'full sized' potentiometers and fit them in place of the original parts.
 
Top