Maker Pro
Maker Pro

what I want to build a power amplifier for a video signal ?

Y

yar

Jan 1, 1970
0
hi

I want build a power amplifier for a video signal coming from a ccd
camera
I don't know what is the information I need to do this ?&what is the
steps?


note : the signal become very bad after about 3 km or higher of the
rg-06 coaxial cable there are some amplifiers but I want to build a
strong one with my self if there is any practical tutorial which I can
used to select the correct components for the power amplifier which I
want to design



thank you for any help
yar
 
P

Peter Bennett

Jan 1, 1970
0
hi

I want build a power amplifier for a video signal coming from a ccd
camera
I don't know what is the information I need to do this ?&what is the
steps?


note : the signal become very bad after about 3 km or higher of the
rg-06 coaxial cable there are some amplifiers but I want to build a
strong one with my self if there is any practical tutorial which I can
used to select the correct components for the power amplifier which I
want to design

If you are going 3 KM, you will need video equalizing amplifiers to
boost the high frequency response. You will probably need one at each
end, and one (or more) in between might also be advisable.

These should be available commercially.

the amplifier will require a bandwidth of at least DC - 4 MHz.


--
Peter Bennett, VE7CEI
peterbb4 (at) interchange.ubc.ca
new newsgroup users info : http://vancouver-webpages.com/nnq
GPS and NMEA info: http://vancouver-webpages.com/peter
Vancouver Power Squadron: http://vancouver.powersquadron.ca
 
yar said:
hi

I want build a power amplifier for a video signal coming from a ccd
camera
I don't know what is the information I need to do this ?&what is the
steps?


note : the signal become very bad after about 3 km or higher of the
rg-06 coaxial cable there are some amplifiers but I want to build a
strong one with my self if there is any practical tutorial which I can
used to select the correct components for the power amplifier which I
want to design



thank you for any help
yar

You might find that a modulator and receiver might cause fewer problems
with the added bonus of sending audio. Baseband video over 3 kilometer
will also have hum issues as well.
GG
 
L

Lawrence Oravetz

Jan 1, 1970
0
yar wrote :
hi

I want build a power amplifier for a video signal coming from a ccd
camera
I don't know what is the information I need to do this ?&what is the
steps?


note : the signal become very bad after about 3 km or higher of the
rg-06 coaxial cable there are some amplifiers but I want to build a
strong one with my self if there is any practical tutorial which I can
used to select the correct components for the power amplifier which I
want to design



thank you for any help
yar

look at www.nvt.com. There youwill find everything necessary to
accomplish your task.
 
Top