Maker Pro
Maker Pro

What's the best place to get a board printed?

Sidecar Bob

Dec 19, 2021
211
Joined
Dec 19, 2021
Messages
211
I want to get the board for one of the projects on bigclive.com . Clive has made the gerber files available but I have no idea where I should go to have it printed.
I'm in Canada if it makes any difference
 

Bluejets

Oct 5, 2014
6,901
Joined
Oct 5, 2014
Messages
6,901
China......many sites online......search pcb manufacturers...cheap as chips.
Freight usually the biggest cost.
 

Minder

Apr 24, 2015
3,478
Joined
Apr 24, 2015
Messages
3,478
I use PCBWAY as one of the sources, They were offering 10 x 100mm x 100mm boards for $5.00.
 

Simon mugo

Mar 27, 2022
4
Joined
Mar 27, 2022
Messages
4
We have so many PCB manufacturers world over. I would not like to recommend my PCB manufacturer but I wish to advice you that you should search for the PCB manufacturers available in your locality. That could make things easy. Although I would not hesitate to say that china has so many leading PCB manufacturers.
Thanks!
 

Sidecar Bob

Dec 19, 2021
211
Joined
Dec 19, 2021
Messages
211
I have been hoping someone would recommend a manufacturer in Canada or at least tell me what to look for when I try to find one myself.

Buying boards online is completely new to me; The last time I did boards for a project I used a spray can of photo resist on the boards and used a sheet of clear film with a red coating that you cut and peeled off to make the negative (I think I might still have it somewhere).
 
Top