Maker Pro
Maker Pro

Whirlpool L1373 - damage possibly done by a centipede

Bud

May 31, 2017
16
Joined
May 31, 2017
Messages
16
If set on normal washing program It takes some water, spins a few times and in about 10s the error is displayed. [/ATTACH]

When you say "takes some water" is it the normal amount? If not, is it an amount of water that might be equal to one of the lower level settings on the machine?
 

Yavorescu

May 24, 2017
11
Joined
May 24, 2017
Messages
11
I can't tell if the water is enough as I'm testing without clothes in the drum. It should take more water than usual, right? I hear the pressostat clicking and in about 10 sec the error is displayed. As I said, the pressostat has 1 level only. I don't know if it is relevant, but after reprogramming the board the machine takes more water than before. Which initially made me believe that the problem was solved...
 
Top