J
[email protected]
- Jan 1, 1970
- 0
Hi guys:
I was stuck..
My GIG PHY can only work at 100M mode.
At 1000M mode, PHY can only receive ,but can not transmit
data.
I am sure software and driver are right,and all TX and Rx
lines are terminated, clock is OK.
Could anyone provide advices?
Thanks a lot
I was stuck..
My GIG PHY can only work at 100M mode.
At 1000M mode, PHY can only receive ,but can not transmit
data.
I am sure software and driver are right,and all TX and Rx
lines are terminated, clock is OK.
Could anyone provide advices?
Thanks a lot