Maker Pro
Maker Pro

why are theese cables connected to my ebike battery

mik_239

Jan 29, 2023
1
Joined
Jan 29, 2023
Messages
1
i have question i have a dechatlon ebike (est 100) and i want to replace the controller but the controller i want have two cables for the power a red and black wire and my ebike battery has lots of cables comming out of it ( 1 thick green wire and one thick yellow whire and many smal wires)
i wil put a photo of it down below can somebody tell me where al these wires are for and how i can fix it
 

Attachments

  • IMG_20230127_162837490.jpg
    IMG_20230127_162837490.jpg
    144.8 KB · Views: 7
  • IMG_20230127_174343861.jpg
    IMG_20230127_174343861.jpg
    161.7 KB · Views: 7

Bluejets

Oct 5, 2014
6,708
Joined
Oct 5, 2014
Messages
6,708
Likely individual cell connections to monitor charge balance.
Unlikely you can "fix" anything as these would be required and the battery would be sealed.
 

Externet

Aug 24, 2009
886
Joined
Aug 24, 2009
Messages
886
Battery packs communicate with electric controls and charger circuits by reporting temperature of cells, signature of type of pack, current in and out, charging inlet wire, protection status, each with an individual wire besides supply +/- ... Obtain manufacturer information and schematics before alter or replace the controller.
 

Delta Prime

Jul 29, 2020
1,642
Joined
Jul 29, 2020
Messages
1,642
Geez! Talk the talk but don't walk the walk. Because you have an e-bike no need to walk. there's a tiny bit more to it. more information is needed before any advice can be given! you're almost there keep on pulling it back and you'll see the controller. This is only an example! And I'm not blowing smoke.
HTB1gEQbKpXXXXXRXVXXq6xXFXXXu.jpg
 
Last edited:
Top