I have a motorized lift to raise and lower a pop up camper. The up/down switch connected via a cord to a socket. The socket connection wore out so I cut out the socket. The wiring from the motor includes a black ground, red, orange and blue wires. I tried to use the existing six blade rocker switch, however, I could not get it to work.
I do have a workaround with a 3 blade rocker switch. It works this way...
To Raise:
Black and Orange connected to ground blade
Red connected to power blade
Blue connected to bottom blade.
To Lower:
Black and Blue connected to ground blade
Red connected to power blade
Orange connected to bottom blade
How can I wire this to a single up/down switch?
I do have a workaround with a 3 blade rocker switch. It works this way...
To Raise:
Black and Orange connected to ground blade
Red connected to power blade
Blue connected to bottom blade.
To Lower:
Black and Blue connected to ground blade
Red connected to power blade
Orange connected to bottom blade
How can I wire this to a single up/down switch?