Maker Pro
Maker Pro

WT: schematics for Viewsonic VX910 LCD

P

Pinballer

Jan 1, 1970
0
Veiwsonic VX910 LCD monitor

If anybody has these schematics or nows of them on line I am trying to find
the part number for D660 on the power board. I've had a few suggestions and
I appreciate it but I'm still stuck.
If worse comes to worse I could try a suitable part (believe to be a dual
diode) if anybody has any suggestions on a replacement.
If she blows she blows, oh well.

Thanks people
Brian
 
F

Franc Zabkar

Jan 1, 1970
0
Veiwsonic VX910 LCD monitor

If anybody has these schematics or nows of them on line I am trying to find
the part number for D660 on the power board. I've had a few suggestions and
I appreciate it but I'm still stuck.
If worse comes to worse I could try a suitable part (believe to be a dual
diode) if anybody has any suggestions on a replacement.

Can you upload a photo of the PCB to your web space?
If she blows she blows, oh well.

Thanks people
Brian

- Franc Zabkar
 
P

Pinballer

Jan 1, 1970
0
I don't have any webspace but I could email you a pic of it. I have the pcb
out of the monitor.
 
F

Franc Zabkar

Jan 1, 1970
0
I don't have any webspace but I could email you a pic of it. I have the pcb
out of the monitor.

OK, do that and I'll post it on my web space for others to look at.

- Franc Zabkar
 
P

Pinballer

Jan 1, 1970
0
WOW. Thankyou very much.
Now to find the part.

Thanks
 
Replace the caps that are around D660. thats what was wrong with the
one i have on my bench. (2) 470ufd at 25v...also there is a 330ufd
cap
wrapped in a sleeve not far from that..replace it...as far as your
diode,
if you can find the original, NTE lists a replacement for MBR20100CT.
Not sure if its the same, but might be worth a shot.
 
P

Pinballer

Jan 1, 1970
0
I went and ordered the diode from my local electronics shop but its going to
take over a week to get it. Thanks for the tip about the caps too. I will
probably do them as well.

Thanks
 
Top