Maker Pro
Maker Pro

X10 to 0-10V conversion

A

Andrew Gabriel

Jan 1, 1970
0
Has anyone come across a small module (ideally small enough to fit inside
a fluorescent luminare) which will pick up mains-borne X10 signals, and
output a 0-10V fluorescent dimmer control voltage?
 
V

Victor Roberts

Jan 1, 1970
0
On Sat, 23 Oct 2010 09:22:25 +0000 (UTC),
Has anyone come across a small module (ideally small enough to fit inside
a fluorescent luminare) which will pick up mains-borne X10 signals, and
output a 0-10V fluorescent dimmer control voltage?

I can't find any either. However, if you open an X10
incandescent lamp dimmer module you are certain to find an
X10 to analog converter inside, since that would seem to be
required to operate the TRIAC.

--
Vic Roberts
http://www.RobertsResearchInc.com
http://www.cflfacts.com
sci.engr.lighting Rogues Gallery http://www.langmuir.org
To reply via e-mail:
replace xxx with vdr in the Reply to: address
or use e-mail address listed at the Web site.

This information is provided for educational purposes only.
It may not be used in any publication or posted on any Web
site without written permission.
 
Top