Maker Pro
Maker Pro

X360 Potentiometer Joystick + HT12D

MstrKurt

Jun 13, 2011
30
Joined
Jun 13, 2011
Messages
30
Hey guys, I'm looking for some help in developing and idea for a motor controlled buggy.

The chips being used for the Transmitter and Receiver are the HT12A and the HT12D

Tx: http://www.rapidonline.com/electronic-components/ht12a-12e-remote-control-encoders-36710/

Rx: http://www.rapidonline.com/Electron...070/?sid=e6b4a79d-0235-463e-8601-10a1115584da

The idea is to have an xbox 360 joystick (http://www.conrad-uk.com/ce/en/product/425624/98002C3-10K-Joystick-Potentiometer) to control the buggy (with the amount of pressure applied to the joystick controlling the speed and the direction controlling the direction the robot moves in)

I will need an analog to digital converter, but is it possible to get the full functionality of the joystick to control the motors with the chips selected?.
 
Top