Maker Pro
Maker Pro

Xbee s2 cannot be detected with X-CTU

zazas321

Oct 1, 2018
9
Joined
Oct 1, 2018
Messages
9
Hello guys. So I have received 2 Xbee s2 microcontrollers. They both been used by someone before. I am currently trying to configure them through X-CTU. I am also using UartSBee v.4.0 shield so I can easily connect microcontroller to PC USB. I have just finished 40 minutes scan(check screenshots) detect my Xbee but it was not able detect any devices. I have tried to scan it whilst connected to arduino but same results. Anything else should i try before i request new microcontrollers becuase these bad boys are expensive :eek:
 

Attachments

  • xbee 40min.png
    xbee 40min.png
    738.6 KB · Views: 16
  • 42916541_683519775356767_8434058400488226816_n.jpg
    42916541_683519775356767_8434058400488226816_n.jpg
    36 KB · Views: 13
Top