Maker Pro
Maker Pro

xenon lamp trigger

tnnelectro

Apr 5, 2012
54
Joined
Apr 5, 2012
Messages
54
Hi,

a confirmation to avoid the worst ...

To change the lamp, I have to desolder the wires from the lamp and the trigger transformer ...

the only thing I did not remember, the common trigger wire if it was combined with the positive or negative of the lamp

and so I had to get the wiring diagram to understand!

Question: the common trigger transformer, given the scheme that I got, must be connected on the positive lamp ... right?

Attachments
 

Attachments

  • TRIGGER_WIRE.jpg
    TRIGGER_WIRE.jpg
    95.4 KB · Views: 19

kellys_eye

Jun 25, 2010
6,514
Joined
Jun 25, 2010
Messages
6,514
Presumably you're talking about the 'straight red line'? This usually wraps around the xenon tube and doesn't actually connect to anything on the tube itself.
 

tnnelectro

Apr 5, 2012
54
Joined
Apr 5, 2012
Messages
54
yes I know, in fact the wire wraps the tube of the lamp ...

I mean the trigger common, should it be connected to the lamp's positive as circled with red in the scheme?
 
Top