Maker Pro
Maker Pro

XG18A 2.4GHz video camera signal

patriots

Jun 10, 2022
1
Joined
Jun 10, 2022
Messages
1
I just received an XG18A video camera power supply operating properly ! But have NO RECEIVER & REMOTE , cannot find a remote for it but your forum says it’s NOT needed to operate ! HOW CAN I VERIFY the X10 IS SENDING OUT A SIGNAL at 2.4GHz ??? Use of oscilloscope ??? I tried a “ WiFi “ program that shows ALL signal present on 2.4GHz & the 5GHz but DO NOT see the cams signal ! The program is free called HOMEDALE and very efficient seeing all wifi around you ! aAny help would be greatly appreciated ! Thanks
LOVE
 
Top