Maker Pro
Maker Pro

Yamaha MG16/4 mixing board

banjomaniac

Mar 3, 2013
75
Joined
Mar 3, 2013
Messages
75
Trying to ID this part or find a schematic for this board. I guess it's part ICG06 on the board but burnt so bad I can't tell what the part number is., Yamaha MG16/4 mixing board.20160726_204334.jpg
 

Heliman

Feb 4, 2016
65
Joined
Feb 4, 2016
Messages
65
I have the schematic for the MG16/6. It doesnt list that part but all the ICG parts are OP-AMPS
 

banjomaniac

Mar 3, 2013
75
Joined
Mar 3, 2013
Messages
75
Thanks for the replies, this came from a church and they gave it to me to check, Im no tech by any means but have fixed a few things for them, I'm not sure what led to this failure. I gotta wonder what else might be damaged, I can't see anything else and I looked this board over 3 times before I saw this part so who knows. I'll see if I can find this part and replace it if it's not too expensive, I hate to spend much only to find out other parts are bad.

Thanks for the help
 

banjomaniac

Mar 3, 2013
75
Joined
Mar 3, 2013
Messages
75
Anyone know if there is a radio shack equivalent for this part? I'm gonna try and replace it this weekend and I'll go through some of my scrap parts but as of now I haven't found one.

Banjomaniac
 

banjomaniac

Mar 3, 2013
75
Joined
Mar 3, 2013
Messages
75
Ok I have another question before I get this part, is the e or d or m after the part number mean anything important? Like NJM4580D or NJM4580M. I don't know if that is like a revision or specifics on limits of the part or what?
 
Top