Maker Pro
Maker Pro

Yamaha R-1000 Receiver offset and idle voltage adjustment.

Steve1965

Mar 12, 2015
1
Joined
Mar 12, 2015
Messages
1
Hello! New to the forum here,and in the process of reworking a nice Yamaha R-1000 receiver i obtained. Went through and recapped power board and replaced a burned resistor on the left channel power amp, and bad capacitors on both amp boards that had leaked. Was looking to see if anyone had the step by step procedures and voltage values to adjust the offset and idle voltages for the power amps. Any help would be appreciated.
 
Top