Maker Pro
Maker Pro

Yorkville MP-8DX : no audio after replacing Monitor Out Jack

R

rw

Jan 1, 1970
0
I helping my sister on this Powered Mixer, I was attempting to replace or
fix a flaky Monitor out 1/4 jack.
I resoldered the Jack, it did not help
I swapped jacks for an unused jack.
Now after, swapping there is no audio
I have not confirmed if the REAR jacks are working at this time
I have reswapped back the jacks, there is no audio.

I have found some cold solders joints elsewhere and repaired them but to no
avail.. I will continue on....

this is what happens, when you try to help out :(

Any suggestions will be of help
Russ
 
Top