Maker Pro
Maker Pro

Zenith SM2568S sound problem

D

DaDragon

Jan 1, 1970
0
Ok, here goes. My Zenith SM2568S has a problem with audio. Through
the coax it appears ok but I cannot get a stereo signal. Through the
A/V RCA audio is very quiet with a popping sound when volume is
adjusted. If I put the audio in SEQ mode, sound is louder but only
through the right speaker. Any help would be appreciated. I'm not
proficient in electronics, but I know my way around a multi-meter and
a soldering iron. Thank you for any help.
 
Top