Search

21 results for : “8x32-matrix-max7219-weather-station”

Showing 1 to 10 of 21 projects.

Learn to Drive 8 LEDs on Raspberry Pi Pico Simulator

https://maker.pro/raspberry-pi/projects/learn-to-drive-8-leds-on-raspberry-pi-pico-simulator

Raspberry Pi Pico simulator from wokwi. The Raspberry Pi Pico emulator can run on browsers. No downloads needed!

TinyML Monitoring Air Quality on 8-bit Microcontroller

https://maker.pro/arduino/projects/tinyml-monitoring-air-quality-on-8-bit-microcontroller

Learn how to create a TinyML model and run it on MCU to detect chemical gases

Tiny ML for Big Hearts on an 8-bit Microcontroller

https://maker.pro/arduino/projects/tiny-ml-for-big-hearts-on-an-8-bit-microcontroller-1

Predict the possibility of arrhythmias on an 8- bit Microcontroller, without sending the corresponding sensor data to the cloud.

Arduino Connect4 Game- Human vs Microcontroller

https://maker.pro/anduino/projects/arduino-connect4-game-human-vs-microcontroller

Connect4 game on an 8 x 8 pixel matrix with 5050 type LEDs with a built-in WS2812B chip. Now we have two game modes, player vs player and player vs microcontroller.

Make a Connect Four Game Using Arduino and an LED Matrix

https://maker.pro/arduino/projects/recreate-connect-four-game-using-arduino-led-matrix

Make this two-player Connect Four game using an Arduino R3 and a 7219 8×8 LED matrix.

Arduino MPU6050 Interactive scrolling game on 32x8 Led Matrix

https://maker.pro/arduino/projects/arduino-mpu6050-interactive-scrolling-game-on-32x8-led-matrix

How to make an interesting interactive game, on a 32 by 8 LED matrix module, which is controlled by moving the device

PCF8574 GPIO Extender - With Arduino and NodeMCU

https://maker.pro/arduino/projects/pcf8574-gpio-extender-with-arduino-and-nodemcu

In this tutorial, I am going to talk about the PCF8574 8-bit GPIO Port Extender. It is one of the many GPIO extenders av

Machine Learning for Makers: How to Add Gesture Control to an Arduino

https://maker.pro/arduino/projects/machine-learning-for-makers-part-8-how-to-add-gesture-control-to-an-arduino

In this article, you will learn how to control the Arduino using gestures through the Wekinator platform.

Make your 3D printer quiet---silent stepper driver chip TMC2130TMC2208

https://maker.pro/4d-systems/projects/make-your-3d-printer-quiet-silent-stepper-driver-chip-tmc2130tmc2208

3D printing (3DP) is a type of rapid prototyping technology. It is a technology that uses adhesive materials such as powdered metal or plastic to construct objects by printing layer by layer based on digital model files.