Programming ESP/NODEMCU with Arduino IDE
https://maker.pro/arduino/projects/programming-espnodemcu-with-arduino-ide
Interfacing ESP boards with popular Arduino IDE
Rover Control with the Tactigon (Arduino IDE)
https://maker.pro/arduino/projects/rover-control-with-the-tactigon-arduino-ide
Learn how to control a simple tracked rover using Euler angles. The remote controller can be put in a glove!
DIY Wio Terminal Spectrum Analyzer (Arduino IDE)
https://maker.pro/arduino/projects/diy-wio-terminal-spectrum-analyzer-arduino-ide
How to connect and install this small but powerful device on Arduino IDE, as well as the basic steps on how to upload a program to it.
How to make Simple 500KHz Oscilloscope with STM32 ( Arduino IDE )
https://maker.pro/stm32-nucleo/projects/how-to-make-simple-500mhz-oscilloscope-with-stm32-arduino-ide
DIY oscilloscope with STM32 Microcontroller which has better performances than Arduino and is also cheaper. With this instrument we can now observe the shape of signals with a frequency of up to 500KHz.
Capacitive Soil Moisture Sensor v1.2 with Wemos D1 Lite (Arduino IDE)
https://maker.pro/esp8266/projects/capacitive-soil-moisture-sensor-v12-with-wemos-d1-lite-arduino-ide
Capacitive soil moisture sensor for Arduino or ESP8266/ESP32
Simple STM32 Frequency meter from 1Hz to 30 MHz (Arduino IDE)
https://maker.pro/stm32-nucleo/projects/simple-stm32-frequency-meter-from-1hz-to-30-mhz-arduino-ide
This frequency meter uses an inexpensive STM32 microcontroller and this time, thanks to his better perfomances of the MCU, the frequency range is from 0 to 30 MHz, and therefore it is ideal for use in HF radio devices.
Arduino Installation
https://maker.pro/arduino/projects/arduino-installation
In this tutorial we learnt about the Arduino IDE installation and Driver Installation for Uno board.
How to Make Your Own Fingerprint Scanner With Arduino UNO
https://maker.pro/arduino/projects/how-to-make-your-own-fingerprint-scanner-with-arduino-uno
Make a fingerprint scanner using an FPM10A fingerprint module, an Arduino UNO, and the Arduino IDE.
How to Build an ESP32-based Facial Recognition System
https://maker.pro/arduino/projects/how-to-build-an-esp32-based-facial-recognition-system
Learn to build a facial recognition system with the ESP32-CAM module with Arduino IDE!