6 results for : “protocol”

MQTT Protocol with Thingsboard Cloud Using Arduino MKR1010

https://maker.pro/arduino/projects/mqtt-protocol-with-thingsboard-cloud-using-arduino-mkr1010

This project is aimed to use MQTT protocol IoT with Arduino MKR1010 WiFi.

How to Decode Modbus Protocol

https://maker.pro/arduino/projects/how-to-decode-modbus-protocol-1

The Modbus protocol was designed to be used with serial devices and applications. 

How to Control, Connect and Wire DMX LED strip

https://maker.pro/controleverything/projects/how-to-control-connect-and-wire-dmx-led-strip

DMX light strips are different from light strips with SPI signal protocol. The DMX LED strip need to set the address before control, because DMX signals are sent in a sequential manner, with each channel of the DMX controller corresponding to a specific light fixture or group of fixtures.

Hydroponic Temperature and Humidity sensing using Arduino and Ubidots over MQTT

https://maker.pro/arduino/projects/hydroponic-temperature-and-humidity-sensing-using-arduino-and-ubidots-over-mqtt

DIY Temperature and Humidity sensing using NodeMCU ESP8266, MQTT protocol, DHT11 sensor and Ubidots.

Enable Communication Between an Arduino and Web Browser 

https://maker.pro/arduino/projects/learn-how-to-enable-communication-between-an-arduino-and-web-browser

Enable communication between an Arduino and Web Browser using the Open Sound Control (OSC) protocol. 

DIY Frost and Zombie detection system for your prized Vegetables using Arduino and Ubidots over HTTP

https://maker.pro/arduino/projects/diy-frost-and-zombie-detection-system-for-your-prized-vegetables-using-arduino-and-ubidots-over-http

DIY Temperature, Humidity, Frost and Zombie sensing using NodeMCU ESP8266, HTTP protocol, DHT11 sensor and Ubidots