Ultrasonic Range Finder With an ATtiny85 Microcontroller
https://maker.pro/arduino/projects/ultrasonic-range-finder-with-an-attiny85-microcontroller
In this Tutorial, We are Going To Make a Ultrasonic Range Finder With an ATtiny85 Microcontroller
How to Build a Cellphone-Controlled Robot
https://maker.pro/pcb/projects/mobile-controlled-robot
Make this quick, simple robot that can operate in as large of a range as your network provider's coverage area.
Measuring Temperature and Humidity with Ameba
https://maker.pro/arduino/projects/measuring-temperature-and-humidity-with-ameba
DHT11 is a temperature and humidity sensor which operates at voltage 3.3V~5V. At room temperature, the measurable range.
Simple STM32 Frequency meter from 1Hz to 30 MHz (Arduino IDE)
https://maker.pro/stm32-nucleo/projects/simple-stm32-frequency-meter-from-1hz-to-30-mhz-arduino-ide
This frequency meter uses an inexpensive STM32 microcontroller and this time, thanks to his better perfomances of the MCU, the frequency range is from 0 to 30 MHz, and therefore it is ideal for use in HF radio devices.
How to Control, Connect and Wire DMX LED strip
https://maker.pro/controleverything/projects/how-to-control-connect-and-wire-dmx-led-strip
DMX light strips are different from light strips with SPI signal protocol. The DMX LED strip need to set the address before control, because DMX signals are sent in a sequential manner, with each channel of the DMX controller corresponding to a specific light fixture or group of fixtures.
How to Make an Explorer Probe for Rockets With DHT11 and an ESP8266
https://maker.pro/esp8266/projects/diy-explorer-probe-rockets-dht111-esp8266
This small explorer probe is designed to sit in a small rocket, land, and relay data back to a server.
Alexa Smart Home using Node MCU
https://maker.pro/esp8266/projects/alexa-smart-home-using-node-mcu
In this project, I will be showing how to automate your house using your voice with Amazon Alexa device.
Build a Clap-to-Fly Drone Using PlutoX
https://maker.pro/esp8266/projects/clap-to-fly-a-drone
Controlling PlutoX takeoff with just a snap
How to Make a Wristband Controller Using Plutox
https://maker.pro/esp8266/projects/wristband-controller-using-plutox
How cool would it be if we could control our drone just with our wrist movements