Search

9 results for : “rover”

Showing 1 to 9 of 9 projects.

Rover Control with the Tactigon (Arduino IDE)

https://maker.pro/arduino/projects/rover-control-with-the-tactigon-arduino-ide

Learn how to control a simple tracked rover using Euler angles. The remote controller can be put in a glove!

Build a Raspberry Pi Rover Robot With Smartphone Control

https://maker.pro/raspberry-pi/projects/build-raspberry-pi-rover-robot-smartphone-control

Make a remote-controlled rover robot using a Raspberry Pi and a webcam.

XBM-DN32H2 PLC Tank Rover Robot Project

https://maker.pro/arduino/projects/xbm-dn32h2-plc-tank-rover-robot-project

Hi, makers! I want to show you all about the progress of my XBM-DN32H2 PLC Tank Rover Robot project. I began to take my bold steps toward the WIFI remote control of the robot, and the postings are to show the result. I used HMI droid app downloaded from Google Play store and also downloaded HMI Droid Studio from the home. Thank you.

Use The Tactigon to Control an Arduino Mini Rover

https://maker.pro/arduino/projects/arduino-powered-robot-controlled-with-the-tactigon

We used The Tactigon to control an Arduino-powered robot via BLE. Moving The Tactigon as a 3D steering wheel is awesome!

Monitored home alarm

https://maker.pro/anduino/projects/monitored-home-alarm

An arduino uno runs an alarm monitor program that allows input from either a 4x3 touch panel or from the base/rover cell phone. The monitor program looks for a closed intruder circuit and raises an alarm to the base/rover cell phone.

DIY simple GU81 Tube Hybrid Amplifier (130 watts RMS in A class)

https://maker.pro/analog/projects/diy-simple-gu81-tube-hybrid-amplifier-130-watts-rms-in-a-class

The amplifier described in this project is "Hybrid", but now the case is reversed and the Tube is used at the output, thus preserving all the positive features of a pure Tube Amplifier.

Large 6 digit 7 segment LED clock using ATMega328P

https://maker.pro/arduino/projects/large-6-digit-7-segment-led-clock-using-atmega328p

A large Arduino based LED clock using 1.8" high digits for the hours and minutes and 0.8" for the seconds. A DS3231 provides and accurate time source and the clock features dimming of the display at night and ability to set time to the second. It is powered from a 12V regulated power supply and has reverse polarity protection to prevent damage.

How to Check for Open Ports in Linux

https://maker.pro/linux/projects/how-to-check-for-open-ports-in-linux

When you are troubleshooting networking issues in Linux or are looking for ways to improve the security of your Linux.

Mini Easy-Plug/Programming Automated Greenhouse

https://maker.pro/arduino/projects/mini-easy-plugprogramming-automated-greenhouse

Mini automated Greenhouse will let you take care of your greens with Easy-Plug microcontroller and block programming.