Search

107 results for : “signal-conditioning”

Showing 1 to 10 of 107 projects.

DIY Function Signal Generator using ICL8038

https://maker.pro/pcb/projects/how-to-make-a-simple-mobile-phone-detector-cell-phone-detector-simple-project

In this video tutorial, I show you step by step how you can make DIY Function Signal Generator using ICL8038

Guide On Implementing Audio Signal Detector

https://maker.pro/custom/projects/guide-on-implementing-audio-signal-detector

The guide describes the implementation of an audio signal detector with the GreenPAK SLG47512. This design can detect human speech or music and can ignore single tone noise or flat random noise. The audio signal detector can be used in safety services or to save energy in audio decks.

How to Make a Traffic Signal Controller

https://maker.pro/custom/projects/how-to-make-a-traffic-signal-controller

This project describes how to implement a traffic controller

Random Pulse Width Modulation for Three-Phase Inverter Applications

https://maker.pro/custom/projects/random-pulse-width-modulation-for-three-phase-inverter-applications

This project provides details of RPWM signal generation for driving three-phase inverters using the SLG46620.

How to Make a Servo Demultiplexer

https://maker.pro/custom/projects/how-to-make-a-servo-demultiplexer

Check outhow to create a model servo motor signal demultiplexer using a Dialog GreenPAK IC.

Simple Arduino Hulda Clark ZAPPER with Timer function

https://maker.pro/arduino/projects/simple-arduino-hulda-clark-zapper-with-timer-function

The device presented in this video generates a signal identical to that of the original Zapper, but is made using a microcontroller, so in addition to being simpler to make, it also gives us the opportunity to add a small display and a timer so that we can continuously monitor the process of applying the therapy.

DIY PC controlled high power PEMF Therapy Device

https://maker.pro/arduino/projects/diy-pc-controlled-high-power-pemf-therapy-device

This universal device is actually only a PEMF signal amplifier and not a complete PEMF device, but therefore it can be connected to various sources of such a signal.

DIY Servo Demultiplexer 

https://maker.pro/custom/projects/diy-servo-demultiplexer

This project describes how to create a model servo motor signal demultiplexer using the GreenPAK IC.

How to Control, Connect and Wire DMX LED strip

https://maker.pro/controleverything/projects/how-to-control-connect-and-wire-dmx-led-strip

DMX light strips are different from light strips with SPI signal protocol. The DMX LED strip need to set the address before control, because DMX signals are sent in a sequential manner, with each channel of the DMX controller corresponding to a specific light fixture or group of fixtures.