Search

49 results for : “wireless-modem”

Showing 1 to 10 of 49 projects.

How to Make a Wristband Controller Using Plutox

https://maker.pro/esp8266/projects/wristband-controller-using-plutox

How cool would it be if we could control our drone just with our wrist movements

Alexa Smart Home using Node MCU

https://maker.pro/esp8266/projects/alexa-smart-home-using-node-mcu

In this project, I will be showing how to automate your house using your voice with Amazon Alexa device.

Build a Clap-to-Fly Drone Using PlutoX

https://maker.pro/esp8266/projects/clap-to-fly-a-drone

Controlling PlutoX takeoff with just a snap

Build a Drone that Also Moves on the Ground

https://maker.pro/esp8266/projects/hybrid-drone-1

Generally we have only seen drones fly, but how cool would it be if we can maneuver it on the ground as well!

TrainerLights Training System to Improve Athletes' Reflexes

https://maker.pro/esp8266/projects/trainerlights-training-system-to-improve-athletes-reflexes

It is a sports training system for athletes, which allows to measure and increase the capacity of reaction time to stimulation, or reflexes.

How to Build a Very Simple DIY Home Automation System

https://maker.pro/esp8266/projects/how-to-build-a-very-simple-diy-home-automation-system

Using a simple relay board and an ESP8266, this project teaches you how you can automate your home!

Simple e-ink display for your projects (MH-ET LIVE 1.54) setup and demo

https://maker.pro/esp8266/projects/simple-e-ink-display-for-your-projects-mh-et-live-154-setup-and-demo

MH-ET LIVE 1.54 E-Paper - cheap e-ink display for your Arduino or ESP (setup and demo)

Capacitive Soil Moisture Sensor v1.2 with Wemos D1 Lite (Arduino IDE) 

https://maker.pro/esp8266/projects/capacitive-soil-moisture-sensor-v12-with-wemos-d1-lite-arduino-ide

Capacitive soil moisture sensor for Arduino or ESP8266/ESP32

Plant Monitoring System  With ESP32, Lolin32 Lite, and Blynk

https://maker.pro/esp8266/projects/plant-monitoring-system-tutorial-esp32-lolin32-lite-blynk

This tutorial shows you how to build a plant condition monitoring system based on Chirp! sensor, Blynk, and ThingSpeak.