Missing programming codes for Moving Message Board

[JPiscitelli]

Hello. I have an Ledvision LC300 3.03 moving message sign with a Philips IR keyboard SWK-8630. Unfortunately, I have lost the instructions with the programming codes and have no way to change the sign. I have scoured the internet and have tried to reach out to the company that has taken over Ledvision with no success. Any help would be appreciated. Thanks much, John.

 

[statas]

i know it has been over 2 years since you posted, but i was attempting to find that same manual online.
i didn't.

but i did find it in real life. if you are still looking, reply here. i'll find a way to get scans to you

 

[Harald Kapp]

@JPiscitelli : a new message for you
@statas : If you want the op to be notified about your find, include him with an "@" sign in your message as demonstrated here.

 

[Venom8898]

@statas. Did you ever find the scans for the keyboard? If so could you please get me the scans. I also have a LEDVision sign that uses that Philips keyboard and am missing the manual to use it. Thanks for any help you can provide. My email is [mod edit: E-mail removed for privacy: please use the conversation feature of the forum to make contact]

 

[JPiscitelli]

Thanks anyway. I gave up after searching for a year or so and got rid of my lighted sign / keyboard.

 

[Venom8898]

Yeah I've been looking for quite a while as well. I saw a glimmer of hope when I saw @statas response to your post. Did they ever send you the documents?

 

[JPiscitelli]

No, I had somehow missed his message until I saw yours. I had gotten rid of it well before he responded anyway. Good luck!

 

[IdahoTim]

i know it has been over 2 years since you posted, but i was attempting to find that same manual online.
i didn't.

but i did find it in real life. if you are still looking, reply here. i'll find a way to get scans to you

@Venom8898
I know this is a super old post, but if anyone is still searching for the software that programs these old scrolling LEDVision units using a Wireless Keyboard or 9-Pin serial cable, I have the software.

It's called LEDWorks from the now defunct company called Electronics Manufacturing Technology, Inc. and/or BriteliteLED(dot)com

I don't want to violate any rules here by attaching the software, so I'll post up a PDF of the User Manual that shows photos of the units it supports.
This manual can be used with the Wireless Keyboard As-Is, or you can use the LEDWorks software and program these units with a Serial Port.

Let me know if you need the actual LEDWorks software.

 

[IdahoTim]

@Venom8898 @JPiscitelli @statas

FYI: Most of the now-defunct BriteLiteLED website can still be found on WayBack Machine Internet Archives
www.briteliteled.com

It still has access to all of the software and manuals.

 

[Harald Kapp]

2018 thread -> closed.