Exploration of planters that orbits stars out the solar system by using Arduino With LDR sensor.

We can discover new planets by looking at whether there is a planet orbiting another star is to wait for a decline in the brightness of the star when the planet crosses in front of it.

Determining the outer planets provides us with a fantastic opportunity to study the physical properties of these planet By comparing them with the planets of the solar system.

Capture.PNG

Transit Methods

LDR Sensor by Arduino

First, you need to connect the LDR to the analog input pin 0 on the Arduino. You have to use a voltage divider configuration to do this. The connection diagram for the Arduino is as given below.

One leg of the LDR is connected to VCC (5V) on the Arduino, and the other to the analog pin 0 on the Arduino. A 100K resistor is also connected to the same leg and grounded. 

nxzFwam6UpisJ0BLmTEsvfwTgaEPEsdf3Ys04qcY (1).jpeg

Connecting wires

2018-03-27 01.22.56.jpg

Note: But it will work better if released out side earth atmosphere.

 the Code for the Arduino LDR Sensor

    int sensorPin = A0; // select the input pin for the potentiometer
int ledPin = 13; // select the pin for the LED
int sensorValue = 0; // variable to store the value coming from the
void setup() {
pinMode(ledPin, OUTPUT);
Serial.begin(9600);
}
void loop() {
sensorValue = analogRead(sensorPin);
digitalWrite(ledPin, HIGH);
delay(sensorValue);
digitalWrite(ledPin, LOW);
delay(sensorValue);
Serial.println(sensorValue, DEC); }
Ali I. SH
I'm interested in studying the Space-Time distortion, Q.M, unified field theory and Experimental technology.

Categories


Forks

Related Arduino Projects